13 Layers 3/4 Inch 4X8 Cheap Marine Plywood for Concrete Formwork

  • 13 Layers 3/4 Inch 4X8 Cheap Marine Plywood for Concrete Formwork
  • 13 Layers 3/4 Inch 4X8 Cheap Marine Plywood for Concrete Formwork
  • <>13
  • Negotiation
  • Negotiation
Send Message
More Product Details

Product Description:

Face&Back Okoume/Bintangor/birch/Pencil cedar/Poplar
Core Poplar/birch/hardwood/combi/eualyptus
Size 1220*2440mm(4'*8'),912*2128mm (3'*7') ,1250*2500mm or customized
Thickness 1.8cm-25mm
Thickness tolerance ±0.2mm(thick<6mm),±0.3mm(thick≥6mm)
Glue  WBP/EO/E1/E2/Melamine,Carb P2
Density  500-620kgs/CBM
Grade B/BB,BB/BB,BB/CC or as your request
Water Absorption  ≤10%
Modulus of Elasticity  ≥5000Mpa
Static Bending Strength  ≥30 Mpa
Surface bonding Strength ≥1.6Mpa
Intrnal Bonding Strength ≥0.9Mpa
Screw Holding Ability,Face ≥1900N

 

Performance:

1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed.
2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould.
3. Solves the problems of leaking and rough surface during constructing process.
4. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat.
5. Realizing a higher economic profits.

Ultimate Guide to Baltic Birch Plywood: Why It's Better, When

May 22, 2017 - To start, Baltic birch is a plywood product native to the northeastern region of Europe around the Baltic Sea. It's manufactured for European 

Baltic Birch Plywood Sheets | B/BB BB/BB & Exterior Grades

Baltic Birch Plywood Sheets are not a specific species of birch, but is a general designation of plywood from Russia and nearby Baltic states (such as Finland)

4 x 8 Baltic Birch Plywood at Menards®

The face and inner plies of this 3/4 x 4 x 8 Baltic Birch Plywood are all equal in thickness for more stability. This plywood features an extra-thick sanded face 

4 x 8 Baltic Birch Plywood at Menards®

The face and inner plies of this 3/4 x 4 x 8 Baltic Birch Plywood are all equal in thickness for more stability. This plywood features an extra-thick sanded face 

Ultimate Guide to Baltic Birch Plywood: Why It's Better, When

May 22, 2017 - To start, Baltic birch is a plywood product native to the northeastern region of Europe around the Baltic Sea. It's manufactured for European 

Baltic Birch Plywood in 5' x 5' and 4' x 8' at Toledo Plywood Co

Baltic Birch is a plywood that is light in color with excellent strength and stability due to core made out of single piece Birch veneers. The thick face veneer allows a 

Writing a Message
  • Please Enter your Subject.
  • Please enter Your valid email address.
Your inquiry content must be between 20 to 5000 characters..